Their construction in high strength polycarbonate and an especially robust design allow the PLADILED 80 series to offer an IP66 protection index against the ingress of water and dust and an IK10 rated impact resistance, thus enabling public building or outdoor use.A mounting bracket is included for quick and easy installation.
Both models include a stand by or safety lighting function. This consists of a secondary timing subsequent to the primary timing, by which lighting is reduced to a 30% level during an adjustable period of time. If the STBY timing is set to ∞, the ceiling light shall stay permanently at the 30% lighting level as long as no detection takes place.This function is typically used in garages or areas that require permanent minimal lighting.
PLADILED 80 E includes an additional safety light function (15% of the maximum lighting level), which will switch on when the electrical supply to the device fails. This light stays on for approximately 2 hours.
Both models are available in white; PLADILED 80 2N is also available in anthracite.By relying on high frequency technology, the sensitivity of the PLADILED 80 devices is not affected by the ambient temperature, draughts, light sources or the direction of movement. However, they are capable of detecting the movement of people or objects, such as lift cabins, even through non metallic surfaces. Therefore, setting the sensitivity is essential for these high frequency detector devices in order to prevent undue activations.