A proximity switch for wall surface installation with 180º detection angle, up to twelve metres to the front and nine metre to the side of the detection angle.
Voltage rating | 230 Va.c. |
Frequency rating | 50 Hz |
Breaking power | 10 A / 250 Va.c. cosφ = 1 |
Own Consumption | 8.5 VA (approximately 1 W) |
Contact type | single, with voltage |
Operating temperature | -10 ºC to +50 ºC |
Maximum recommended loads | - Incandescent lamps: 1,000 W
- Fluorescent without compensation: 500 W
- Fluorescent without compensation: 250 W
- Low voltage halogen: 500 VA
- Halogen (230Va.c.): 1,000 W
- Low consumption lamps: 200 W
|
Timing | 10 seconds to 10 minutes approximately |
Detection angle | 180º at 20º C |
Detection field | 12 meters frontal at 20 º C |
Protection class | Class II in accordance with EN 60335 under correct installation conditions |
Protection type | IP 44 in accordance with EN 60529 |
Installation | surface |